This site is intended for healthcare professionals
Abstract digital waveforms in blue and purple
FDA Drug information

Dextrose and Sodium Chloride

Read time: 3 mins
Marketing start date: 05 Dec 2024

Summary of product characteristics


Adverse Reactions

6 ADVERSE REACTIONS - Anaphylactic reaction, hypersensitivity, and chills - Hyponatremia (applies to solutions containing less than 0.9% Sodium Chloride) Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary. Adverse reactions include electrolyte imbalances, hyperglycemia, and hypervolemia and injection site reactions. ( 6 ) To report SUSPECTED ADVERSE REACTIONS, contact Baxter Healthcare at 1-866-888-2472 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

Contraindications

4 CONTRAINDICATIONS Dextrose and Sodium Chloride Injection is contraindicated in patients with: • known hypersensitivity to dextrose and/or sodium chloride [see Warnings and Precautions 5.1) ] • clinically significant hyperglycemia [see Warnings and Precautions (5.2) ] • Known hypersensitivity to dextrose, or sodium chloride ( 4 , 5.1 ) • Clinically significant hyperglycemia ( 4 , 5.2 )

Description

11 DESCRIPTION Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in single-dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1 . Table 1. Size (mL) Composition (g/L) Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Osmolarity (mOsmol/L) (calc.) pH Ionic Concentration (mEq/L) Caloric Content (kcal/L) **Dextrose Hydrous, USP Sodium Chloride, USP (NaCl) Sodium Chloride 2.5% Dextrose and 0.45% Sodium Chloride Injection, USP 1000 25 4.5 280 4.5 (3.2 to 6.5) 77 77 85 5% Dextrose and 0.2% Sodium Chloride Injection, USP 250 500 1000 50 2 321 4.0 (3.2 to 6.5) 34 34 170 5% Dextrose and 0.33% Sodium Chloride Injection, USP 250 500 1000 50 3.3 365 4.0 (3.2 to 6.5) 56 56 170 5% Dextrose and 0.45% Sodium Chloride Injection, USP 500 1000 50 4.5 406 4.0 (3.2 to 6.5) 77 77 170 5% Dextrose and 0.9% Sodium Chloride Injection, USP 500 1000 50 9 560 4.0 (3.2 to 6.5) 154 154 170 Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Dextrose Structural Formula

Dosage And Administration

2 DOSAGE AND ADMINISTRATION • Only for intravenous infusion. ( 2.1 ) • See full prescribing information for information on preparation, administration, dosing considerations and instructions for use. ( 2.1 , 2.2 , 2.3 ) 2.1 Important Administration Instructions • Dextrose and Sodium Chloride Injection is only for intravenous infusion. • The osmolarity of Dextrose and Sodium Chloride Injection, ranges from 280 to 560 mOsmol/L (calc). Peripheral administration is generally acceptable; however; consider central vein administration if there is peripheral vein irritation, phlebitis, and/or associated pain. • Do not administer Dextrose and Sodium Chloride Injection simultaneously with blood products through the same administration set because of the possibility of pseudoagglutination or hemolysis. • To prevent air embolism, use a non-vented infusion set or close the vent on a vented set, avoid multiple connections, do not connect flexible containers in series, fully evacuate residual gas in the container prior to administration, do not pressurize the flexible container to increase flow rates, and if administration is controlled by a pumping device, turn off pump before the container runs dry. • Prior to infusion, visually inspect the solution for particulate matter. The solution should be clear and there should be no precipitates. Do not administer unless solution is clear and container is undamaged. • Use of a final filter is recommended during administration of parenteral solutions, where possible. 2.2 Recommended Dosage The choice of the specific, sodium chloride, and dextrose concentrations, rate and volume depends on the age, weight, clinical and metabolic conditions of the patient and concomitant therapy. Electrolyte supplementation may be indicated according to the clinical needs of the patient. The administration rate should be governed, especially for premature infants with low birth weight, during the first few days of therapy, by the patient’s tolerance to dextrose. Increase the infusion rate gradually as indicated by frequent monitoring of blood glucose concentrations [see Warnings and Precautions (5.2) , Use in Specific Populations (8.4) ] . 2.3 Instructions for Use To Open • Do not remove container from overwrap until ready to use. • Tear overwrap down side at slit and remove solution container. • Visually inspect the container. Some opacity of the plastic due to moisture absorption during the sterilization process may be observed. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually. Evaluate the following: ∘ If the outlet port protector is damaged, detached, or not present, discard container. ∘ Check to ensure the solution is clear and there are no precipitates. Discard if there is a color change and/or the appearance of precipitates, insoluble complexes or crystals. ∘ Check for minute leaks by squeezing inner bag firmly. If leaks are found, discard container. Preparation for Administration 1. Suspend container from eyelet support. 2. Remove protector from outlet port at bottom of container. 3. Attach administration set. Refer to complete directions accompanying set. To Add Medication • Additives may be incompatible. Complete information is not available. Do not use additives known or determined to be incompatible. • Consult with pharmacist, if available. If, in the informed judgment of the healthcare provider, it is deemed advisable to introduce additives, use aseptic technique. • When introducing additives, consult the instructions for use of the medication to be added and other relevant literature. • Before adding a substance or medication, verify that it is soluble and/or stable in Dextrose and Sodium Chloride Injection and that the pH range of Dextrose and Sodium Chloride Injection is appropriate. To Add Medication Before Solution Administration 1. Prepare medication site. 2. Using syringe with 19 to 22-gauge needle, puncture resealable medication port and inject. 3. Mix solution and medication thoroughly. For high density medication such as potassium chloride, squeeze ports while ports are upright and mix thoroughly. 4. After addition, check to ensure the solution is clear and there are no precipitates. Discard if there is a color change and/or the appearance of precipitates, insoluble complexes or crystals. To Add Medication During Solution Administration 1. Close clamp on the set. 2. Prepare medication site. 3. Using syringe with 19 to 22-gauge needle, puncture resealable medication port and inject. 4. Remove container from IV pole and/or turn to an upright position. 5. Evacuate both ports by squeezing them while container is in the upright position. 6. Mix solution and medication thoroughly. 7. After addition, check to ensure the solution is clear and there are no precipitates. Discard if there is a color change and/or the appearance of precipitates, insoluble complexes or crystals, do not use. 8. Return container to in use position and continue with administration. Storage • Use promptly; do not store solutions containing additives. • Single-dose container. • Discard any unused portion.

Indications And Usage

1 INDICATIONS AND USAGE Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories. Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories. ( 1 )

Overdosage

10 OVERDOSAGE Excessive administration of Dextrose and Sodium Chloride Injection can cause: Electrolyte and Fluid Disorders • Hyperglycemia, hyperosmolality, and adverse effects on water and electrolyte balance, and corresponding complications, which can be fatal [see Warnings and Precautions (5.2) ] . • Hyponatremia, manifestations may include seizures, coma, cerebral edema and death) [see Warnings and Precautions (5.3) ] . • Hypernatremia, especially in patients with severe renal impairment [see Warnings and Precautions (5.5) ] . • Fluid overload (which can lead to central and/or peripheral edema) [see Warnings and Precautions (5.6) ] . When assessing an overdose, any additives in the solution must also be considered. Clinically significant overdose of Dextrose and Sodium Chloride Injection may, therefore, constitute a medical emergency. The effects of an overdose may require immediate medical attention and treatment. Interventions include discontinuation of the infusion, dose reduction, monitoring of fluid balance, electrolyte concentrations and acid-base balance and institution of appropriate corrective measures such as administration of exogenous insulin.

Drug Interactions

7 DRUG INTERACTIONS • Other Products that Affect Glycemic Control, Vasopressin or Fluid and/or Electrolyte Balance : Monitor blood glucose concentrations, fluid balance serum electrolyte concentrations and acid-base balance. ( 7.1 ) • Lithium : Decreased lithium concentrations with concomitant use; monitor serum lithium concentrations. ( 7.2 ) 7.1 Other Products that Affect Glycemic Control, Vasopressin or Fluid and/or Electrolyte Balance Dextrose and Sodium Chloride Injection can affect glycemic control, vasopressin and fluid and/or electrolyte balance [see Warnings and Precautions (5.2 , 5.3 , 5.4 , 5.5 , 5.6) ] . Monitor blood glucose concentrations, fluid balance, serum electrolyte concentrations and acid-base balance when using Dextrose and Sodium Chloride Injection in patients treated with other substances that affect glycemic control, vasopressin or fluid and/or electrolyte balance. 7.2 Lithium Renal sodium and lithium clearance may be increased during administration of Dextrose and Sodium Chloride Injection resulting in decreased serum lithium concentrations. Monitor serum lithium concentrations during concomitant use.

Clinical Pharmacology

12 CLINICAL PHARMACOLOGY Dextrose and Sodium Chloride Injection, USP has value as a source of water, electrolytes, and calories. It is capable of inducing diuresis depending on the clinical condition of the patient. 12.1 Mechanism of Action Dextrose and Sodium Chloride Injection is a source of water, electrolytes and calories. It is capable of inducing diuresis depending on the clinical condition of the patient.

Mechanism Of Action

12.1 Mechanism of Action Dextrose and Sodium Chloride Injection is a source of water, electrolytes and calories. It is capable of inducing diuresis depending on the clinical condition of the patient.

Effective Time

20190822

Version

12

Description Table

Table 1.

Size (mL)

Composition (g/L)

Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L.Osmolarity (mOsmol/L) (calc.)

pH

Ionic Concentration (mEq/L)

Caloric Content (kcal/L)

**Dextrose Hydrous, USP

Sodium Chloride, USP (NaCl)

Sodium

Chloride

2.5% Dextrose and 0.45% Sodium Chloride Injection, USP

1000

25

4.5

280

4.5

(3.2 to 6.5)

77

77

85

5% Dextrose and 0.2% Sodium Chloride Injection, USP

250

500

1000

50

2

321

4.0

(3.2 to 6.5)

34

34

170

5% Dextrose and 0.33% Sodium Chloride Injection, USP

250

500

1000

50

3.3

365

4.0

(3.2 to 6.5)

56

56

170

5% Dextrose and 0.45% Sodium Chloride Injection, USP

500

1000

50

4.5

406

4.0

(3.2 to 6.5)

77

77

170

5% Dextrose and 0.9% Sodium Chloride Injection, USP

500

1000

50

9

560

4.0

(3.2 to 6.5)

154

154

170

Dosage Forms And Strengths

3 DOSAGE FORMS AND STRENGTHS Dextrose and Sodium Chloride Injection are clear solutions in 250 mL, 500 mL and 1000 mL single-dose, flexible containers: 250 mL flexible container • 5% Dextrose and 0.2% Sodium Chloride Injection, USP 500 mL flexible container • 5% Dextrose and 0.2% Sodium Chloride Injection, USP • 5% Dextrose and 0.33% Sodium Chloride Injection, USP • 5% Dextrose and 0.45% Sodium Chloride Injection, USP • 5% Dextrose and 0.9% Sodium Chloride Injection, USP 1000 mL flexible container • 2.5% Dextrose and 0.45% Sodium Chloride Injection, USP • 5% Dextrose and 0.2% Sodium Chloride Injection, USP • 5% Dextrose and 0.45% Sodium Chloride Injection, USP • 5% Dextrose and 0.9% Sodium Chloride Injection, USP Dextrose and Sodium Chloride Injection is available in multiple strengths. See full prescribing information for detailed description of each product. ( 3 )

Spl Product Data Elements

Dextrose and Sodium Chloride Dextrose and Sodium Chloride DEXTROSE MONOHYDRATE ANHYDROUS DEXTROSE SODIUM CHLORIDE SODIUM CATION CHLORIDE ION WATER Dextrose and Sodium Chloride Dextrose and Sodium Chloride DEXTROSE MONOHYDRATE ANHYDROUS DEXTROSE SODIUM CHLORIDE SODIUM CATION CHLORIDE ION WATER Dextrose and Sodium Chloride Dextrose and Sodium Chloride DEXTROSE MONOHYDRATE ANHYDROUS DEXTROSE SODIUM CHLORIDE SODIUM CATION CHLORIDE ION WATER Dextrose and Sodium Chloride Dextrose and Sodium Chloride DEXTROSE MONOHYDRATE ANHYDROUS DEXTROSE SODIUM CHLORIDE SODIUM CATION CHLORIDE ION WATER Dextrose and Sodium Chloride Dextrose and Sodium Chloride DEXTROSE MONOHYDRATE ANHYDROUS DEXTROSE SODIUM CHLORIDE SODIUM CATION CHLORIDE ION WATER

Application Number

NDA016683

Brand Name

Dextrose and Sodium Chloride

Generic Name

Dextrose and Sodium Chloride

Product Ndc

0338-0085

Product Type

HUMAN PRESCRIPTION DRUG

Route

INTRAVENOUS

Package Label Principal Display Panel

PACKAGE/LABEL PRINCIPAL DISPLAY PANEL Container Label Container Label LOT EXP 2B1063 NDC 0338-0089-03 5% Dextrose and 0.9% Sodium Chloride Injection USP 500 mL EACH 100 mL CONTAINS 5 g DEXTROSE HYDROUS USP 900 mg SODIUM CHLORIDE USP pH 4.0 (3.2 TO 6.5) mEq/L SODIUM 154 CHLORIDE 154 HYPERTONIC OSMOLARITY 560 mOsmol/L (CALC) STERILE NONPYROGENIC SINGLE DOSE CONTAINER ADDITIVES MAY BE INCOMPATIBLE CONSULT WITH PHARMACIST IF AVAILABLE WHEN INTRODUCING ADDITIVES USE ASEPTIC TECHNIQUE MIX THOROUGHLY DO NOT STORE DOSAGE INTRAVENOUSLY AS DIRECTED BY A PHYSICIAN SEE DIRECTIONS CAUTIONS SQUEEZE AND INSPECT INNER BAG WHICH MAINTAINS PRODUCT STERILITY DISCARD IF LEAKS ARE FOUND MUST NOT BE USED IN SERIES CONNECTIONS DO NOT USE UNLESS SOLUTION IS CLEAR RX ONLY STORE UNIT IN MOISTURE BARRIER OVERWRAP AT ROOM TEMPERATURE (25°C/77°F) UNTIL READY TO USE AVOID EXCESSIVE HEAT SEE INSERT VIAFLEX CONTAINER PL 146 PLASTIC BAXTER VIAFLEX AND PL 146 ARE TRADEMARKS OF BAXTER INTERNATIONAL INC FOR PRODUCT INFORMATION 1-800-933-0303 BAXTER Logo BAXTER HEALTHCARE CORPORATION DEERFIELD IL 60015 USA MADE IN USA 1 2 3 4 Container Label Container Label LOT EXP 2B1024 NDC 0338-0073-04 2.5% Dextrose and 0.45% Sodium Chloride Injection USP 1000 mL EACH 100 mL CONTAINS 2.5 g DEXTROSE HYDROUS USP 450 mg SODIUM CHLORIDE USP pH 4.0 (3.2 TO 6.5) mEq/L SODIUM 77 CHLORIDE 77 OSMOLARITY 280 mOsmol/L (CALC) STERILE NONPYROGENIC SINGLE DOSE CONTAINER ADDITIVES MAY BE INCOMPATIBLE CONSULT WITH PHARMACIST IF AVAILABLE WHEN INTRODUCING ADDITIVES USE ASEPTIC TECHNIQUE MIX THOROUGHLY DO NOT STORE DOSAGE INTRAVENOUSLY AS DIRECTED BY A PHYSICIAN SEE DIRECTIONS CAUTIONS SQUEEZE AND INSPECT INNER BAG WHICH MAINTAINS PRODUCT STERILITY DISCARD IF LEAKS ARE FOUND MUST NOT BE USED IN SERIES CONNECTIONS DO NOT USE UNLESS SOLUTION IS CLEAR RX ONLY STORE UNIT IN MOISTURE BARRIER OVERWRAP AT ROOM TEMPERATURE (25°C/77°F) UNTIL READY TO USE AVOID EXCESSIVE HEAT SEE INSERT VIAFLEX CONTAINER PL 146 PLASTIC BAXTER VIAFLEX AND PL 146 ARE TRADEMARKS OF BAXTER INTERNATIONAL INC FOR PRODUCT INFORMATION 1-800-933-0303 Baxter Logo BAXTER HEALTHCARE CORPORATION DEERFIELD IL 60015 USA MADE IN USA 1 2 3 4 5 6 7 8 9 Container Label Container Label LOT EXP 2B1092 NDC 0338-0077-02 5% Dextrose and 0.2% Sodium Chloride Injection USP 250 mL EACH 100 mL CONTAINS 5 g DEXTROSE HYDROUS USP 200 mg SODIUM CHLORIDE USP pH 4.0 (3.2 TO 6.5) mEq/L SODIUM 34 CHLORIDE 34 OSMOLARITY 321 mOsmol/L (CALC) STERILE NONPYROGENIC SINGLE DOSE CONTAINER ADDITIVES MAY BE INCOMPATIBLE CONSULT WITH PHARMACIST IF AVAILABLE WHEN INTRODUCING ADDITIVES USE ASEPTIC TECHNIQUE MIX THOROUGHLY DO NOT STORE DOSAGE INTRAVENOUSLY AS DIRECTED BY A PHYSICIAN SEE DIRECTIONS CAUTIONS SQUEEZE AND INSPECT INNER BAG WHICH MAINTAINS PRODUCT STERILITY DISCARD IF LEAKS ARE FOUND MUST NOT BE USED IN SERIES CONNECTIONS DO NOT USE UNLESS SOLUTION IS CLEAR RX ONLY STORE UNIT IN MOISTURE BARRIER OVERWRAP AT ROOM TEMPERATURE (25°C/77°F) UNTIL READY TO USE AVOID EXCESSIVE HEAT SEE INSERT VIAFLEX CONTAINER PL 146 PLASTIC BAXTER VIAFLEX AND PL 146 ARE TRADEMARKS OF BAXTER INTERNATIONAL INC FOR PRODUCT INFORMATION 1-800-933-0303 BAXTER Logo BAXTER HEALTHCARE CORPORATION DEERFIELD IL 60015 USA MADE IN USA 50 100 150 200 Container Label Container Label Container Label LOT EXP 2B1083 NDC 0338-0081-03 5% Dextrose and 0.33% Sodium Chloride Injection USP 500 mL EACH 100 mL CONTAINS 5 g DEXTROSE HYDROUS USP 330 mg SODIUM CHLORIDE USP pH 4.0 (3.2 TO 6.5) mEq/L SODIUM 56 CHLORIDE 56 OSMOLARITY 356 mOsmol/L (CALC) STERILE NONPYROGENIC SINGLE DOSE CONTAINER ADDITIVES MAY BE INCOMPATIBLE CONSULT WITH PHARMACIST IF AVAILABLE WHEN INTRODUCING ADDITIVES USE ASEPTIC TECHNIQUE MIX THOROUGHLY DO NOT STORE DOSAGE INTRAVENOUSLY AS DIRECTED BY A PHYSICIAN SEE DIRECTIONS CAUTIONS SQUEEZE AND INSPECT INNER BAG WHICH MAINTAINS PRODUCT STERILITY DISCARD IF LEAKS ARE FOUND MUST NOT BE USED IN SERIES CONNECTIONS DO NOT USE UNLESS SOLUTION IS CLEAR RX ONLY STORE UNIT IN MOISTURE BARRIER OVERWRAP T ROOM TEMPERATURE (25°C/77°F) UNTIL READY TO USE AVOID EXCESSIVE HEAT SEE INSERT VIAFLEX CONTAINER PL 146 PLASTIC BAXTER VIAFLEX AND PL 146 ARE TRADEMARKS OF BAXTER INTERNATIONAL INC FOR PRODUCT INFORMATION 1-800-933-0303 Baxter Logo BAXTER HEALTHCARE CORPORATION DEERFIELD IL 60015 USA MADE IN USA 07-25-34-096 1 2 3 4 Container Label Container Label LOT EXP 2B1073 NDC 0338-0085-03 5% Dextrose and 0.45% Sodium Chloride Injection USP 500 mL EACH 100 mL CONTAINS 5 g DEXTROSE HYDROUS USP 450 mg SODIUM CHLORIDE USP pH 4.0 (3.2 TO 6.5) mEq/L SODIUM 77 CHLORIDE 77 HYPERTONIC OSMOLARITY 406 mOsmol/L (CALC) STERILE NONPYROGENIC SINGLE DOSE CONTAINER ADDITIVES MAY BE INCOMPATIBLE CONSULT WITH PHARMACIST IF AVAILABLE WHEN INTRODUCING ADDITIVES USE ASEPTIC TECHNIQUE MIX THOROUGHLY DO NOT STORE DOSAGE INTRAVENOUSLY AS DIRECTED BY A PHYSICIAN SEE DIRECTIONS CAUTIONS SQUEEZE AND INSPECT INNER BAG WHICH MAINTAINS PRODUCT STERILITY DISCARD IF LEAKS ARE FOUND MUST NOT BE USED IN SERIES CONNECTIONS DO NOT USE UNLESS SOLUTION IS CLEAR RX ONLY STORE UNIT IN MOISTURE BARRIER OVERWRAP AT ROOM TEMPERATURE (25°C/77°F) UNTIL READY TO USE AVOID EXCESSIVE HEAT SEE INSERT VIAFLEX CONTAINER PL 146 PLASTIC BAXTER VIAFLEX AND PL 146 ARE TRADEMARKS OF BAXTER INTERNATIONAL INC FOR PRODUCT INFORMATION 1-800-933-0303 BAXTER Logo BAXTER HEALTHCARE CORPORATION DEERFIELD IL 60015 USA MADE IN USA 1 2 3 4 Dextrose and Sodium Chloride Representative Container Label NDC 0338-0089-03 Dextrose & Sodium Chloride Representative Container Label NDC 0338-0073-04 Dextrose & Sodium Chloride Representative Container Label NDC 0338-0077-02 Dextrose and Sodium Chloride Representative Container Label 0338-0081-03 Dextrose & Sodium Chloride Representative Container Label NDC 0338-0085-03

Recent Major Changes

Contraindications ( 4 ) 08/2019 Warnings and Precautions ( 5.1 , 5.2 , 5.3 , 5.4 , 5.5 , 5.6 , 5.7 ) 08/2019

Information For Patients

17 PATIENT COUNSELING INFORMATION Inform patients, caregivers or home healthcare providers of the following risks of Dextrose and Sodium Chloride Injection: • Hypersensitivity reactions [see Warnings and Precautions (5.1) ] • Hyperglycemia and hyperosmolar hyperglycemic state [see Warnings and Precautions (5.2) ] • Hyponatremia [see Warnings and Precautions (5.3) ] • Hypokalemia [see Warnings and Precautions (5.4) ] • Hypernatremia and hyperchloremia [see Warnings and Precautions (5.5) ] • Fluid overload [see Warnings and Precautions (5.6) ] • Refeeding syndrome [see Warnings and Precautions (5.7) ] Baxter Healthcare Corporation Deerfield, IL 60015 USA Printed in USA Distributed in Canada by Baxter Corporation Mississauga, ON L5N 0C2 07-19-74-506 Baxter, and Viaflex and PL 146 are trademarks of Baxter International Inc. For Product Information 1-800-933-0303

Geriatric Use

8.5 Geriatric Use Clinical studies of Dextrose and Sodium Chloride Injection did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Elderly patients are at increased risk of developing hyponatremia as well as for developing hyponatremic encephalopathy [see Warnings and Precautions (5.3) ] . Dextrose and Sodium Chloride Injection is known to be substantially excreted by the kidney, and the risk of adverse reactions to this product may be greater in patients with impaired renal function [see Warnings and Precautions (5.2 , 5.5) ] . Dose selection for an elderly patient should be cautious, starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.

Pediatric Use

8.4 Pediatric Use The safety profile of Dextrose and Sodium Chloride Injection in pediatric patients is similar to adults. Neonates, especially premature infants with low birth weight, are at increased risk of developing hypo- or hyperglycemia and therefore need close monitoring during treatment with intravenous glucose solutions to ensure adequate glycemic control in order to avoid potential long-term adverse effects. Closely monitor plasma electrolyte concentrations in pediatric patients who may have impaired ability to regulate fluids and electrolytes. In very low birth weight infants, excessive or rapid administration of Dextrose and Sodium Chloride Injection may result in increased serum osmolality and risk of intracerebral hemorrhage. Children (including neonates and older children) are at increased risk of developing hyponatremia as well as for developing hyponatremic encephalopathy.

Pregnancy

8.1 Pregnancy Risk Summary Appropriate administration of Dextrose and Sodium Chloride Injection during pregnancy is not expected to cause adverse developmental outcomes, including congenital malformations. Animal reproduction studies have not been conducted with Dextrose and Sodium Chloride Injection. The estimated background risk of major birth defects and miscarriage for the indicated population is unknown. All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2 to 4% and 15 to 20%, respectively.

Use In Specific Populations

8 USE IN SPECIFIC POPULATIONS 8.1 Pregnancy Risk Summary Appropriate administration of Dextrose and Sodium Chloride Injection during pregnancy is not expected to cause adverse developmental outcomes, including congenital malformations. Animal reproduction studies have not been conducted with Dextrose and Sodium Chloride Injection. The estimated background risk of major birth defects and miscarriage for the indicated population is unknown. All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2 to 4% and 15 to 20%, respectively. 8.2 Lactation Risk Summary Sodium is present in human breast milk. There are no data on the effects of Dextrose and Sodium Chloride Injection on a breastfed infant or the effects on milk production. The developmental and health benefits of breastfeeding should be considered along with the mother’s clinical need for Dextrose and Sodium Chloride Injection and any potential adverse effects on the breastfed infant from Dextrose and Sodium Chloride Injection or from the underlying maternal condition. 8.4 Pediatric Use The safety profile of Dextrose and Sodium Chloride Injection in pediatric patients is similar to adults. Neonates, especially premature infants with low birth weight, are at increased risk of developing hypo- or hyperglycemia and therefore need close monitoring during treatment with intravenous glucose solutions to ensure adequate glycemic control in order to avoid potential long-term adverse effects. Closely monitor plasma electrolyte concentrations in pediatric patients who may have impaired ability to regulate fluids and electrolytes. In very low birth weight infants, excessive or rapid administration of Dextrose and Sodium Chloride Injection may result in increased serum osmolality and risk of intracerebral hemorrhage. Children (including neonates and older children) are at increased risk of developing hyponatremia as well as for developing hyponatremic encephalopathy. 8.5 Geriatric Use Clinical studies of Dextrose and Sodium Chloride Injection did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Elderly patients are at increased risk of developing hyponatremia as well as for developing hyponatremic encephalopathy [see Warnings and Precautions (5.3) ] . Dextrose and Sodium Chloride Injection is known to be substantially excreted by the kidney, and the risk of adverse reactions to this product may be greater in patients with impaired renal function [see Warnings and Precautions (5.2 , 5.5) ] . Dose selection for an elderly patient should be cautious, starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy. 8.6 Renal Impairment Administration of Dextrose and Sodium Chloride Injection in patients with renal impairment may result in hyperosmolar hyperglycemic state, hyponatremia, and/or fluid overload. Monitor patients with renal impairment for development of these adverse reactions [see Warnings and Precautions (5.2 , 5.3 , 5.5 , 5.6) ] .

How Supplied

16 HOW SUPPLIED/STORAGE AND HANDLING Dextrose and Sodium Chloride Injection are clear solutions in 250 mL, 500 mL and 1000 mL single-dose, flexible containers available as follows: Code Size (mL) NDC Product Name 2B1024 1000 0338-0073-04 2.5% Dextrose and 0.45% Sodium Chloride Injection, USP 2B1092 250 0338-0077-02 5% Dextrose and 0.2% Sodium Chloride Injection, USP 2B1093 500 0338-0077-03 2B1094 1000 0338-0077-04 2B1083 500 0338-0081-03 5% Dextrose and 0.33% Sodium Chloride Injection, USP 2B1073 500 0338-0085-03 5% Dextrose and 0.45% Sodium Chloride Injection, USP 2B1074 1000 0338-0085-04 2B1063 500 0338-0089-03 5% Dextrose and 0.9% Sodium Chloride Injection, USP 2B1064 1000 0338-0089-04 Storage : Avoid excessive heat. Store at room temperature (25°C/77°F); brief exposure up to 40°C/104°F does not adversely affect the product.

How Supplied Table

Code

Size (mL)

NDC

Product Name

2B1024

1000

0338-0073-04

2.5% Dextrose and 0.45% Sodium Chloride Injection, USP

2B1092

250

0338-0077-02

5% Dextrose and 0.2% Sodium Chloride Injection, USP

2B1093

500

0338-0077-03

2B1094

1000

0338-0077-04

2B1083

500

0338-0081-03

5% Dextrose and 0.33% Sodium Chloride Injection, USP

2B1073

500

0338-0085-03

5% Dextrose and 0.45% Sodium Chloride Injection, USP

2B1074

1000

0338-0085-04

2B1063

500

0338-0089-03

5% Dextrose and 0.9% Sodium Chloride Injection, USP

2B1064

1000

0338-0089-04

Learning Zones

The Learning Zones are an educational resource for healthcare professionals that provide medical information on the epidemiology, pathophysiology and burden of disease, as well as diagnostic techniques and treatment regimens.

Disclaimer

The drug Prescribing Information (PI), including indications, contra-indications, interactions, etc, has been developed using the U.S. Food & Drug Administration (FDA) as a source (www.fda.gov).

Medthority offers the whole library of PI documents from the FDA. Medthority will not be held liable for explicit or implicit errors, or missing data.

Drugs appearing in this section are approved by the FDA. For regions outside of the United States, this content is for informational purposes only and may not be aligned with local regulatory approvals or guidance.